-->

• Download Kamstrup A/s Port Devices Driver Ed
• Download Kamstrup A/s Port Devices Driver
• Download Kamstrup A/s Port Devices Driver Updater

This section describes the generic WinUSB driver (Winusb.sys) and its user-mode component (Winusb.dll) provided by Microsoft for all USB devices.

In versions of Windows earlier than Windows XP with Service Pack 2 (SP2), all USB device drivers were required to operate in kernel mode. If you created a USB device for which the operating system did not have a native class driver, you had to write a kernel-mode device driver for your device.

Document Display HPE Support Center. Argentina Australia Austria Bangladesh Belarus Belgium Bolivia Brazil Bulgaria Canada Chile China Mainland Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dominican Republic Ecuador Egypt El Salvador Estonia Finland France Germany Greece Guatemala Honduras Hong Kong S.A.R. Of China Hungary India Indonesia Ireland Israel Italy Japan. Khc Kamstrup A/S Download procedure Kamstrup METERTOOL and LogView programs 1. To access the download you must use the “FileZilla Download manager program”. To optain the FileZilla program you can use the link below: 3. Go to the Homepage and download and install the FileZilla program (Download FileZilla client). Used in combination with 4501/4511/4512 and 4590, the PReset software can also be used to save configurations from the following devices to the PC and download these configurations to subsequent devices of the same type: 3114, 4104, 4114, 4116, 4131, 4179, 4184, 4222, 9113, 9116; Technical characteristics.

Windows USB (WinUSB) is a generic driver for USB devices that was developed concurrently with the Windows Driver Frameworks (WDF) for Windows XP with SP2. The WinUSB architecture consists of a kernel-mode driver (Winusb.sys) and a user-mode dynamic link library (Winusb.dll) that exposes WinUSB functions. By using these functions, you can manage USB devices with user-mode software.

Winusb.sys is also a key part of the link between a UMDF function driver and the associated device. Winusb.sys is installed in the device's kernel-mode stack as an upper filter driver. An application communicates with the device's UMDF function driver to issue read, write, or device I/O control requests. The driver interacts with the framework, which passes the request to Winusb.sys. Winusb.sys then processes the request and passes it to the protocol drivers and ultimately to the device. Any response returns by the reverse path. Winusb.sys also serves as the device stack's Plug and Play and power owner.

Note WinUSB functions require Windows XP or later. You can use these functions in your C/C++ application to communicate with your USB device. Microsoft does not provide a managed API for WinUSB.

This section describes how to use WinUSB to communicate with your USB devices. The topics in this section provide guidelines about choosing the correct driver for your device, information about installing Winusb.sys as a USB device's function driver, and a detailed walkthrough with code examples that show how applications and USB devices communicate with each other.

This section includes the following topics:

Windows Support for WinUSB

The following table summarizes WinUSB support in different versions of Windows.

Note Yes¹: All SKUs of this version of Windows support WinUSB on x86-based, x64-based, and Itanium-based systems.

Download Kamstrup A/s Port Devices Driver Ed

Yes²: All SKUs of this version of Windows support WinUSB on x86-based and x64-based systems.

Download Kamstrup A/s Port Devices Driver

Yes³: All client SKUs of Windows XP with SP2 service packs support WinUSB. WinUSB is not native to Windows XP; it must be installed with the WinUSB co-installer.

Download Kamstrup A/s Port Devices Driver Updater

No: WinUSB is not supported in this version of Windows.

USB Features Supported by WinUSB

The following table shows the high-level USB features that are supported by WinUSB in different versions of Windows.

Related topics